Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
Hi guys how easy is it to replace the crank seal gearbox side once the gearbox ahy fly wheel has been removed. I've got to do the clutch on my car soon. And I have noticed an oil leak coming from the car to around gearbox how ever I'm not ruling out that it could be the sump gasket . The car has done around 92k thanks in advance regards James
 

·
Moderator
Joined
·
5,891 Posts
With the flywheel removed screw a couple of small self tapping screws into main part of seal and use these as a lever point to pull out seal. Smear of grease on new seal then tap into place with a copper faced hammer or similar
 
1 - 4 of 4 Posts
Top