Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
Hi,

The power steering on my girlfriends peugeot 307 is starting to fail. Its working but after so long it decides to stop working. Usually turning the engine off then back on sorts it out for a bit but its getting worse. I've been trying to source a second hand unit from similar cars but they say that it wont fit. Ours is a 307 envy 1.4,

any help would be appreciated thank you

Lee
 

·
Registered
Joined
·
23 Posts
Discussion Starter #2
Will a peugeot 307 Lx part fit mine? the engines are the same. And alls that is different is the LX and envy and obviously added extras for the LX?

Lee
 

·
Registered
Joined
·
23 Posts
Discussion Starter #4
what would you mean by check the wiring? ive had a look and the connectors seem the same?

thanks for replying

Lee
 

·
Registered
Joined
·
23 Posts
Discussion Starter #6
Oh ha ha i get you. When i unplugged the cables the first time it started doing it the connector on the right hand side was soaked it fluid. I thought i had pulled something wrong out. Could that be a reason ? Also it seems to do it when the car hits 90 degrees temp?
 

·
Registered
Joined
·
23 Posts
Discussion Starter #7
Managed to get my part number so that should help. Removed both cables to see whats going on and again the left cable was leaking loads of PAS fluid the other was bone dry
 
1 - 7 of 7 Posts
Top