Peugeot Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Step one connect a booster pack or jump leads to the battery using another battery this is for ppl that don't have a radio code
Disconnect battery terminals and remove battery and remove battery tray now you have plenty room to work I bypassed the breather and went for the reverse switch as the breathe plug looked a strange fitting. Anyway disconnect wire going to reverse switch use a 22mm deep socket take out reverse switch fill with the correct oil and replace everything in reverse job done. This is on a 62 reg car
 
1 - 1 of 1 Posts
Top