Peugeot Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4,511 Posts
on the harness that goes from the car to the radio there will be 2 wires...one coloured yellow and the other red...half way down these there maybe a set of plugs...swap these over...ie..from car to radio - yellow to red, red to yellow. this swaps the ignition live and constant live around.

when you see it, it will all make sense

that seperate iso connector maybe for cars that do not have the correct connectors to plug straight into the car.

hope this helps.
 

·
Registered
Joined
·
4,511 Posts
if there are no plugs, you will need to gently swap the plugs at the end of the harness that goes into to the radio
 

·
Registered
Joined
·
4,511 Posts
thats the ones, inside these will be somesort of plug, may need pliers to pull out. but double check to make sure it is on both, if it is swap and try again...should be sorted.
 
1 - 4 of 4 Posts
Top