Peugeot Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi I bought a cd player from halfords and fitted it myself, it works okay except it doesnt remember my preset stations.
In the fuse box there are two slots for the radio (24A and 24B) i've swapped the fuse over and still no luck.
When i fit it there was one iso connector that is spare, any ideas what this could be and if it might be the problem?

Any help appreciated!
 

·
Registered
Joined
·
4,511 Posts
on the harness that goes from the car to the radio there will be 2 wires...one coloured yellow and the other red...half way down these there maybe a set of plugs...swap these over...ie..from car to radio - yellow to red, red to yellow. this swaps the ignition live and constant live around.

when you see it, it will all make sense

that seperate iso connector maybe for cars that do not have the correct connectors to plug straight into the car.

hope this helps.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
thanks for the reply!

from the Cd player there are a yellow and red wire but these just go to where the box where the two iso connectors from the car are plugged in. halfway down these wires there are like two rubber coverings, is this what you mean?
 
1 - 7 of 7 Posts
Top