Peugeot Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 107 automatic and am experiencing problem when putting it into engaged it seems to come out and go into neutral but when i then try to re start it it won't start. I have taken it to two diagnostic places plus peugeot dealer but they are unable to locate problem as there is no error code. Peugeot updated the software and it lasted for a week before happening again. Its a 2005 model and has only 15000 on the clock. Has anyone else or know of anyone who have had this fault :confused:
 
C

·
Guest
Joined
·
0 Posts
Alas, the MMT is the one with which I have little experience - I broke the only one I drove!

Geriatric know a his way around these and he might pop in if we're lucky.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
peugeot 107 automatic

No am starting in neutral it's when i put it into engage it judders and goes no where. if i leave it for 24 hrs its like the computer re sets its self and starts.
 

·
Registered
Joined
·
20 Posts
my 107 triptonic is running sweet ,no problems

I have a 107 automatic and am experiencing problem when putting it into engaged it seems to come out and go into neutral but when i then try to re start it it won't start. I have taken it to two diagnostic places plus peugeot dealer but they are unable to locate problem as there is no error code. Peugeot updated the software and it lasted for a week before happening again. Its a 2005 model and has only 15000 on the clock. Has anyone else or know of anyone who have had this fault :confused:
my little 107 [13 plate] is going grate :confused:
 

·
Registered
Joined
·
586 Posts
I have a 107 automatic and am experiencing problem when putting it into engaged it seems to come out and go into neutral but when i then try to re start it it won't start. I have taken it to two diagnostic places plus peugeot dealer but they are unable to locate problem as there is no error code. Peugeot updated the software and it lasted for a week before happening again. Its a 2005 model and has only 15000 on the clock. Has anyone else or know of anyone who have had this fault :confused:
One of the sensors has detected that a setting on the gear or clutch actuator is faulty or is itself - faulty. On a tech with the right knowledge will be able to fix this and I dont think this will be a cheap fix.
 
1 - 6 of 6 Posts
Top