Peugeot Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
It is complaining about eco mode on the screen. When i looked the Delphi program doesn't recognize the key chip. So i changed another similar chip from another car and programmed it with the Delphi program. Now it recognizes the key but says "ecu locked".

I've tried resetting the bsi and checked fault codes. The fault codes show as a bsi communication failure and some odd software controversy.
 

·
Registered
Joined
·
15,376 Posts
You CANNOT reprogram a used chip the ecu is locked because the chip no longer matches what is in the memory.

Eco mode is not an issue this is simply because its not starting its NOT the issue.

You have made matters worse by messing around with the chip.
 

·
Registered
Joined
·
15,376 Posts
Yes you can program a new chip but you will then muck up your remote locking !

I doubt your chip is the issue put the original back do the beep test
 
1 - 8 of 8 Posts
Top