Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1 (Edited)
Morning All,

I am looking for an image of where the rear P/S brake pipe runs.

Mainly the area around the subframe....



I have repaired this are several times and the top fitting which attaches to the hose keeps leaking.

Now i have tightened this up as much as I can without it shearing and it keeps leaking.

It is ok for weeks/months then all of a sudden it gives in and dumps fluid everywhere.

The only thing I can think of is that the piping is in the wrong place causing it to move in the fitting thus causing a leak....

EDIT:: Or it could have something to do with the steel spring fitting

Any assistance would be greatly appreciated.

Ross
 

Attachments

·
Registered
Joined
·
174 Posts
I can't tell what vehicle you are referring to , on my 307 the brake pipe runs parallel to the suspension same as the green in your picture.
 

·
Moderator
Joined
·
5,034 Posts
How low have you got it sat ??
 

·
Moderator
Joined
·
5,034 Posts
Sorry should have been clearer meant how low is the car ??
 

·
Moderator
Joined
·
5,034 Posts
So why is the torsion bar out ?? Normally done to lower the ride height
 

·
Registered
Joined
·
174 Posts
Trem 1, I think we are talking at cross purposes here , I mistook your questions were for me and not for the original poster! (senior moment). apologies :eek:
 
1 - 8 of 8 Posts
Top