Peugeot Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I have 307sw 2007 1.6 al4 .my parking aid was working fine until i used my new pp2000 this night to make daigonistics.
Then it stoped working and i checked by the pp2000 it says not working ,any advice ??
 

·
Registered
Joined
·
1,861 Posts
Do you have a button to turn off the parking sensors for use when towing etc. perhaps you have pressed it by mistake?
 

·
Registered
Joined
·
21 Posts
Discussion Starter #6
Response data
R61809661496880000696614968805C006300004056102299

State of the ECU: AAS
Reference 1 : 9661496880
Reference 2 :
Faults present : 1

FBD0 : rear parking assistance buzzer fault
Characterisation : not characterised.
Status :
Location : local.
Variables associated with the fault
 

·
Registered
Joined
·
21 Posts
Discussion Starter #8
Try connecting back up and go into the MFD configuration and look in all the options for parking ais. It may be under a topic named driving assistance or similar.



i did and park aid is present but i found attached screen shot any explain??

AFFICHEUR : multifunction display
Response data
R61809645683880002E9663230780180B000C014044628499

State of the ECU: EMF_C
Reference 1 : 01
Reference 2 :
Faults present : 1

F8EB : Fault: absence of the screen permanent plus
Characterisation : not characterised.
Status :
Location : local .
Variables associated with the fault



INJ : injection/ignition
Response data
R61FE0CFC000003130F0B060560114517090FFEA2AA2102642557

State of the ECU: ME745
Reference 1 : 642557
Reference 2 :
Faults present : 1

P1701 : Fault lack of coherence of the gearbox ratio
Characterisation : Not characterised
Status : intermittent
Location : distant
Variables associated with the fault
Engine speed : 768 rpm
vehicle speed : 0 kph
manifold pressure. : 390 mbars
richness regulation status : closed loop
 

Attachments

1 - 11 of 11 Posts
Top