Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter #1
hi all had the 307sw for a few months now
loving it had a few issues with starting but sorted with new battery and starter motor
now have a new issue
went to close the roof lining today has always worked fine up till now
but today as it was closing made a almighty grinding noise and erm well only the first section came over the roof
soo i have about 20 inches of roof closes and leaves the rest behind
all the electrics etc are working the rail etc as it closes the front bit right up to where it should be
but its not fetching the rest with it its staying back in the rear space
sooo my question/s is/are
is the roof seperate sections that should somehow lock or pick each other up(not sure how the folding process works)
or should it all be one piece of fabric and if its split thats my issue?
 

·
Registered
Joined
·
102 Posts
Hi!
The same happend to me once. I "opened" the lining fully, eg used the switch/motor to pull it fully bacwards, and the pieces hooked in to each other and it worked without problem for a couple of years (until the car was sold) after that.
---/Thomas
Sent from AutoGuide.com Free App
 
1 - 2 of 2 Posts
Top