Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,423 Posts
Discussion Starter #1
hi all just done the timing belt on my car bosch 2.0hdi 110bhp

got it all running and took it out. the cars in limp mode drives fine up to this point. this fault wasn't there before.

any tips. it wont clear. heres the screenshots



 

·
Registered
Joined
·
3,423 Posts
Discussion Starter #3
hi all this is the first time ive actually had a fault thats not been part related

i searched google and it actually went back to a thread on here. someone mentioned a connector underneath. seems logical as i had to take the starter out

heres the culprit


now one wire had snapped but it was right by the connector. so couldnt repair it

as its very tight i undid the wiring loom at the front to give me more room. one but 1 i cut each cable and joined and soldered them

i did have to clear the fault in planet but the cars back to normal now

with the egr blanked it actually runs better now :D
 
1 - 3 of 3 Posts
Top