Peugeot Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,426 Posts
If it requires an adapter (usually to swap the pins 8 and 3 to 14 and 6, respectively CAN Low and CAN High) either the dongle or the phone app to read the dongle are [email protected] The official answer is the Lexia 3 cable with the DiagBox software.

You probably be fine with a Vgate iCar Pro dongle with the Car Scanner app. Without adapter, just configure the app correctly.
 
1 - 2 of 2 Posts
Top