Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
388 Posts
Discussion Starter #1
I've noticed the NSF door handle is very loose, I've removed and refitted the exterior handle and lock and it is a bit better.

Is there anymore mounting points on the inner handle, as that's what feels loose?

I'm wondering if it's worth stripping the door down to get inside?

Also it's missing the gasket, does anyone know if that gasket changes anything?

Many thank Ben.

Sent from my COR-L29 using Tapatalk
 

·
Registered
Joined
·
3,491 Posts
It’s clipped into a metal bracket inside the door.

You can take the handle off by taking the lock part out with the plastic cap over it (no key hole on the passenger side) the grub screw is behind a rubber cap on the inside of the door as you open it by the lock you can then see the bracket and whether it’s loose

May just be a worn spring where the handle pulls on also


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
388 Posts
Discussion Starter #3
Just to wrap this up,

I noticed the rubber sill around the lock was missing, so I swapped it over from another door.

Now it's perfect, but the other is loose now

£4 on eBay buys a set of 4 new ones


Sent from my COR-L29 using Tapatalk
 
1 - 3 of 3 Posts
Top