Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I apologise if this has been covered before but I am getting confused.

So as the title suggests I have no heat coming from my heaters. I believe the water pump to be ok as the water is pumping back into the header tank.

I have tried bleeding the system to ensure there is no air locks.

The car does not over heat and runs perfectly at 90 degrees.

Can anyone tell me how I can access the heater matrix to flush etc
 

·
Registered
Joined
·
22 Posts
Hi.

First you need to remove the black box that takes the air ( on the right when you are looking at car from the front ) , then remove the air tube going to air filter case. Then remove the air filter case and you are done. Then you will see in the back 2 hoses with plastic clips that goes into the heater matrix. Remove both of them and flush with garden hose.

I removed the heater matrix 2 times from the car and flush it in house and i used also some chemicals ( not very hard chemicals ) but worked just for about 1 day.
And recently i decided to flush it how i described you in the first line and still works. It gives me about 68 celsius degrees at idle.
 
1 - 2 of 2 Posts
Top