Peugeot Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey everyone! I just bought a 308 2015, active 1200cc 130hp petrol
until now I was driving around with a DS3 2013 which takes 5W40 oil (under PSA B71 2290 certification)

I looked over the internet and I didn't found the certification code for my 308. Hope you guys will help me with that
I also need some recommendations for the right oils (I know TOTAL is recommended but in my country they just too hard to find and very expensive)

I got Motul 8100 X-cess 5W40 for the DS3 - will this be fine for the 308? (the oil stand with PSA B71 2290)

so long story short I just need:
1. the certification "code" of the oil type
2. recommendation for good oils (Motul / liqui moly are very common in my country)
3. to know if my current Motul 5W40 oil is good for the 308

thanks a lot
 

·
Registered
Joined
·
1,832 Posts
PSA B71 2312 is the oil spec.

2015 built 308 will likely suffer from the known rear axle problem plus the timing belt falling apart & clogging up the oil ways.

Inlet valves get coked up to.

Welcome to modern Peugeot ownership.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
PSA B71 2312 is the oil spec.

2015 built 308 will likely suffer from the known rear axle problem plus the timing belt falling apart & clogging up the oil ways.

Inlet valves get coked up to.

Welcome to modern Peugeot ownership.
What?
no way to prevent those problems?

after how many km the timing belt should be replaced?
 

·
Registered
Joined
·
30 Posts
Hey everyone! I just bought a 308 2015, active 1200cc 130hp petrol
until now I was driving around with a DS3 2013 which takes 5W40 oil (under PSA B71 2290 certification)

I looked over the internet and I didn't found the certification code for my 308. Hope you guys will help me with that
I also need some recommendations for the right oils (I know TOTAL is recommended but in my country they just too hard to find and very expensive)

I got Motul 8100 X-cess 5W40 for the DS3 - will this be fine for the 308? (the oil stand with PSA B71 2290)

so long story short I just need:
1. the certification "code" of the oil type
2. recommendation for good oils (Motul / liqui moly are very common in my country)
3. to know if my current Motul 5W40 oil is good for the 308

thanks a lot
The oil for 1.2 Puretech 130 Vehicle is Total Quartz Ineo HTC 5W30.
 

·
Registered
Joined
·
28 Posts
It needs to be PSA B71 2312 so Total Ineo First 0W30.
 

·
Registered
Joined
·
30 Posts
Yea its very clear that , it is Quartz INEO First.

Our Authrized services dealer in Istanbul said that PSA announced the changing oil spec 2 months ago. I guess it depends on the country and climate differences huh?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #10
anybody know if this oil is okay to drive in our crazy hot Israeli summer ?(temps can go up to 52 Celsius)


Which oil certification I need to look for?
2312 or 2297
 
1 - 11 of 11 Posts
Top