you need to swap the whole mirror(for electric folding types) then add the correct door commander in the drivers arm rest - it has a switch to force the mirrors to fold on demand - both types have heater elements fixed to the back of each mirror(which is where you get the feed for your LED in the mirror- re exhaust dpf regens)
Swapped the mirrors , mirrors switch is the same , just needed to take mirrors switch trim piece and break off plastic stick blocking switch from moving back , reprogramed the bsi to let it know that car has these mirrors , but still doesnt work , tommorow going to swap chip on the window regulator from the same car i took the mirrors out off .Bsi registers that i want to fold back the mirrors , it shows on pp2000 .
......re 407 "Tyre Pressures NOT monitored" warning. Anyone know what to do about this warning......is there a simple way to disable it or better still fix the underlying problem?? (annoying) Cheers from down-under NZ
2008 407 sw 1.6 hdi RT4 with Nav
This is an ideia tell me what you think. and help on some of my questions
Since our cars have this RT and RD units and its a pain to change them and have functions etc..what about this...
I want to buy a double din with gps bluetooth usb etc etc. make...
My car is an 407 SW 2.0 2006 petrol
This is my second thread at this forum, i receive fantastic response and help in my other thread, instead of continuing the old thread I start this because it is another issue, the first one is that the card wont start and this is about the readings that I...