Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
407 1.6 HDI, I had fault codes saying that the MAF sensor was faulty I have ODB check from Torque on a Sony Tablet and a bluetooth adaptor to read the codes, but I cannot clear the codes.
I have replaced the sensor and the car appears to go a bit better,
where do I go from here?
 

·
Moderator
Joined
·
12,098 Posts
If the MAF was faulty and a replacement has cured the fault then the fault will clear after three driving cycles.

If it doesn't then that wasn't the problem, or the only problem.
 
1 - 3 of 3 Posts
Top