Peugeot Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
286 Posts
Discussion Starter #1 (Edited)
Hi guys. Could anyone do a compair test on there lexia leads for me?. Those in the know will know which end is which. It appears after a little testing, ive got two lines to pin 4 (the earth) and ive got nothing to pin 5 (the second earth). Am i reading the drawing correctley?. pin 1 12volt ign, pin 2 not used, pin3 ecu/egr relay/instrument pannel, pin4/5 earth, pin 6 aircon, pin 7 ecu/trans control, pin8 engin blower/ecu, pin9 not used, pin 10 not used, pin 11 Immobilizer, pin 12 ABS, pin 13 Airbag, pin 14 not used, pin 15 Trans control/ecu, and pin 16 12 volts constant. All i basicley need to know is, do the pin positions look the same as your lexia leads on the second picture, because theres more pins on the interface side, and im wondering if my leads have been wired correctley?. Many thanks :)
 

Attachments

1 - 1 of 1 Posts
Top