Peugeot Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
First post so be kind!
Plugged my 207 1.6hdi 2007 in this morning to track down what’s causing the ABS light to light up on the dash!
It’s come back with C1326 left hand sensor fault coherence.

I cleaned both the sensors with brake cleaner and both the air gaps appear to be the same.

Looking at buying and fitting a new sensor.

Iv can remove the sensor and can see the plugs under the rear seats.. but how the bleedy hell do I get the old cable out and run the new one?

Any advice is much appreciated.

Thanks 😊
 

·
Moderator
Joined
·
8,935 Posts
Coherence means the circuit is file its just under or over reading the left hand sensor compared to the others, either the sensor gap is too big (should be no more that 1mm), the sensor ring is dirty/damaged or the sensor is failing and not reading correctly
 
1 - 2 of 2 Posts
Top