Peugeot Forums banner

Judder on set off?

7K views 6 replies 6 participants last post by  Stubbo 
#1 ·
Hi Guys Im new to this forum and just bought a 307 HDI 90. Thought it was a half decent buy but in the 2 weeks Ive had it there have been many faults.
The one Im dealing with now is that there is a judder on the clutch bite at set of. Its so bad that the front wheels vibrate. If I set of a 2000rpm there is no issue, so its just there when driving normally.
I have already changed top strut mounts track rod ends drop links and have 2 driveshafts on order but I dont think its that as there is no other signe of this judder.
Any help would be much appreciated.
 
#5 ·
Obviously check the easy bits first.
I changed the mrs clutch last year she had a similar problem but it turned out the thrust bearing has disintegrated and we were left with 2 washers operating the clutch release,i took the gearbox off and the ball bearings fell out the bottom is the clutch smooth to operate?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top