Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi Guys Im new to this forum and just bought a 307 HDI 90. Thought it was a half decent buy but in the 2 weeks Ive had it there have been many faults.
The one Im dealing with now is that there is a judder on the clutch bite at set of. Its so bad that the front wheels vibrate. If I set of a 2000rpm there is no issue, so its just there when driving normally.
I have already changed top strut mounts track rod ends drop links and have 2 driveshafts on order but I dont think its that as there is no other signe of this judder.
Any help would be much appreciated.
 

·
Registered
Joined
·
10 Posts
definately clutch

i had the exact same problem but my release bearing also started squeeling so i decided to replace clutch...

solved my judder issue and horrid squeel
 

·
Registered
Joined
·
556 Posts
Obviously check the easy bits first.
I changed the mrs clutch last year she had a similar problem but it turned out the thrust bearing has disintegrated and we were left with 2 washers operating the clutch release,i took the gearbox off and the ball bearings fell out the bottom is the clutch smooth to operate?
 
1 - 7 of 7 Posts
Top