Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter #1
Hi there think i might have a problem...

I took all the injectors out marked them and took them down to my local diesel specilist and he referb all my injectors i got them back and all the marks of what place they where in have been gone..

I stick all the seals back on
and turned the key it trys to start runs for like 2 secs and revs and then dies

my mate who just deals with mondeos has said the engine i got the

1.6 HDI is put in fiesta and he is sure they need to be programed and so he would think that mine would as well. so befoer i go ripping it all to bits

Do they need programing or have i another problem I got my mate with his snap on reader and just comes up with a code relating to glow plugs but i cant see that stopping it from running,.

P1351 (that was the error code) one pending and one current))

that was only one... but he did say if it does need programing he would assume that it would come up with injector failures etc.,
 

·
Registered
Joined
·
9,733 Posts
They need coding ,

No they won`t show injector faults ,

you need peugeot plant diagnostics and the outside 8 numbers on top of the injectors ,

you can code them in any position and they are numbered 1 to 4 from the passenger side to the drivers side .

Although i would have thought it would have run but just like a bag of sh1t.
 
1 - 2 of 2 Posts
Top