Peugeot Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
2002 206, when I push the hazard warning button, the relay clicks away at the normal rate, but no lights flash. If I try to indicate left or right turn, I get rapid clicks (as though one globe was out) but no indicators work. I have checked all the fuses: all are in place and intact. Everything else is working, the car runs well.
Can anyone help or tell me what might be wrong.:confused:
 

·
Registered
Joined
·
442 Posts
2002 206, when I push the hazard warning button, the relay clicks away at the normal rate, but no lights flash. If I try to indicate left or right turn, I get rapid clicks (as though one globe was out) but no indicators work. I have checked all the fuses: all are in place and intact. Everything else is working, the car runs well.
Can anyone help or tell me what might be wrong.:confused:
Not sure, but hazard and normal might use different relays, with the hazard being a non-load sensitive one (thus keeping normal pace no matter how many bulbs are connected).
That neither gives you any bulbs lighting makes me suspect a wiring issue somewhere central.

Do the green indicators in the instrument cluster flash?
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
No, they didn't. But I tried a resync yet again, and suddenly they are working correctly. But now the damned remote/central locking won't work, even after several attempts to recode the PLIP.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top