Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
399 Posts
Discussion Starter #1
I have a 2.0 HDI 90 on a 02 plate, I need a ABS pump and did a last min bid on eBay and won one for £6 :thumb:
The car it came off was the same as mine but on a 04 plate.
Would they be the same pump or could there be more than one:confused:
If there is more pumps out there how can I find out if its the right one?
There's a sticker with bosh and some numbers would they be the same?
Thanks
 

·
Registered
Joined
·
3,491 Posts
as long as its the make pump and the connectors are the same it should work

i changed one on my missus ford ka. the part numbers were slightly different but it was the same pump. it works fine

to do a test get the new one. unplug the old one. plug in the new one but dont fit it. then start it up and see if it works
 

·
Registered
Joined
·
399 Posts
Discussion Starter #3
as long as its the make pump and the connectors are the same it should work

i changed one on my missus ford ka. the part numbers were slightly different but it was the same pump. it works fine

to do a test get the new one. unplug the old one. plug in the new one but dont fit it. then start it up and see if it works
How will I know If it works? Will my breaking error on the dash not come on?
 
1 - 3 of 3 Posts
Top