Peugeot Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I recently purchased an RT3 sat nav from ebay. the system came complete with the head unit ,screen, fans and the complete wiring from the doner vehicle including the quadlock. I thorght that this would make life easy when fitting as I could simply swap block part A,B and C as they already had the screen fan video inputs wired to them, over to the quadlock on my car, only leaving the 12v +, Ground - and the high and Low can wire pins to change over. I have now done that the problem is: the orange light above the SOS button comes on and the fan runs for a couple of seconds but nothing else happens and i carn't operate the RT3 at all. the screen remains blank. the funny thing is that the origanal C screen still displays the basic information from the car when I reconnect it at the screen end of the wiring. I thought that the screen was powered from the head set and the DT screen is wired up at that end. If any one has any idea what I am doing wrong please let me know.
I am insalling it into a 2007 307cc
 
1 - 1 of 1 Posts
Top