Peugeot Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Recently my clock stopped went full DIM, thought the 4 bulbs caused the problem, but figured I was horribly wrong. It seems like the connector on the back has gone loose and I need to hold it upwards with my fingers to get it working, most likely that black plastic cover that holds it in place cut on one of
the sides. Do I need to completely take off the connector and get a replacement?

Btw, something that I can never understand with 206's display is the fact it goes very dark when turning the lights on, luckly that doesn't apply for the dash
because I've got one of those buttons, but not the other one for the clock.

Anyone else had this sort of problem, already replaced all of those bulbs on the back. Need suggestions for the connector.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top