Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi hope you guys can help.
My partner has a 206 my05 1.4 and the 2 key's we have are held with tape. So we
ordered of ebay two key cases with blade and one with gubbins for a spare (3 in total).
Ive looked through the forum and google and cant seem to get the keys to work.

New case with original gubbins - starts car but lock and unlock doesnt work

New key - doesnt start car or lock/unlock by remote

Ive followed the hold lock button 10sec route but nothing.

Your help would be appreciated
 

·
Registered
Joined
·
1,061 Posts
New key with new PCB has to be programmed to car using 4 digit code and Planet. Did the old key lock/unlock remotely?
Think I'd consult an auto locksmith, will cost but at least you will get the keys working quickly.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
The old keys worked but not all the time, had to use the blade to access and lock vehicle most times.

So the new pcb key will need to be programmed withe the code which is for the immobiliser.
What about the original keys that start the car, how do you re learn them to the vehicle?

Thanx
 

·
Registered
Joined
·
15,377 Posts
Planet/diagbox tells you what to do as you go but sounds like your key remote section is faulty its a common issue on them it can be repaired though.

You need to program ALL keys when you program the new keys or the original will no longer work.
 
1 - 5 of 5 Posts
Top