Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #3
heater

My heater only works by direct feed.
Changed the resister but still no working of panel. But when out ignition on there is a fan motor noise under dash. But sick of using a spare battery to have heat. Thought of bridging the red wires to work fan ?
 
G

·
Guest
Joined
·
0 Posts
Have you checked the following;

Ignition to Heater control panel, then control panel to resistor, then resistor to motor?

The resistor is the usual suspect, if you wiggle the green connector with the engine running and fan blowing on full, will it burst into life?

The ignition leads are the next culprit - the connection wears out behind the barrel, maybe wiggle the keys when engine on and fan on full..
 
1 - 4 of 4 Posts
Top