Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I have checked all I know but I must be missing something.

  • The fan works off the car.
  • Fuse #18 is not blown and there is 14.4v across the fuse when the engine is running.
  • There is continuity on the resistor.
  • When I put the aircon switch on and move the blower to the first position I hear the compressor cut in, so the blower switch must be working.
I'm at a loss.

Thanks for looking.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
As I mentioned, I removed the resistor and there is continuity on all terminals.

I am missing something but don't know what.

I have searched the forums previously and if I found the answer I wouldn't have posted.

Thanks for your comment.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #4
I have 3 black wires coming out of the resistor and one goes nowhere. It looks like a wire is supposed to be connected to it but there is just a pigtail, although I can't find a wire that is loose that might go to it.

Perhaps that is causing it to malfunction.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
Some muppet had put a fuse in series in the live cable from the resistor. It melted and it was hidden behind the dashboard.

After stripping half the dash apart and removing the resistor too, I rewired them all back properly. Hopefully the fuse in the fusebox will blow if there is a problem.
 
1 - 5 of 5 Posts
Top