Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi there, I'm new to the forums as i picked up a nice 307 a couple of weeks ago. It has a few issues but hopefully nothing major, one thing i have noticed though is the nearside headlight aim is quite high but only for the dip beam, the main is set level.

Bit of an odd set-up as they are both on the same frame and therefore should not be able to move independently of one another. Both bulbs are seated properly and nothing is broken.

Any ideas as to why or how this happends? I'm starting to get fed up with blinding the people i follow :confused:
 
J

·
Guest
Joined
·
0 Posts
Out of curiosity, swap over the dipped beam bulbs from LH to RH and see if its the same... I've had odd patterns before, and it was due to the bulb itself.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
Good call :thumb: I have taken both bulbs out to see if they sat right but didn't think to swap them over. Had the whole unit out this afternoon to see if anything had cracked and dropped but it all looks fine, not much else it could be surely.
 
1 - 3 of 3 Posts
Top