Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
My wife's car failed NCT (Ireland's MOT) because the low beam headlight bulbs are not focused correctly.

Both bulbs appear to be seated correctly but when I look at the bulbs from the front of the head light, both bulbs are pointing up and not centered in the circular ring (See attached image).

I tried the headlight adjuster and found that although I can hear the motor moving the headlights don't adjust up and down. I suspect this may have something to do with the issue but not sure how to be sure.

I would welcome any advice.
 

Attachments

·
Registered
Joined
·
28 Posts
Discussion Starter #3
I've figured it out...
I tapped the height adjustment motors a few times and they began working properly. Lights started moving up and down when adjusting.

More importantly, I found that both bulbs were installed upside down.
 
1 - 4 of 4 Posts
Top