Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1 (Edited)
Im having excessive white smoke after night and takes a while till it startup,last time i filled with some bad diesel i think,and engine is cranking in acceleration.Could it be a bad fuel injector should i use a fuel additive or change the fuel injectors.

Thanks in advance

P.S:No power loss

Sent from my SM-G928F using Tapatalk
 

·
Registered
Joined
·
2,451 Posts
Yes there is a slight leak at the injector, but that wouldn't cause white smoke and poor starting.
When I had this problem on an older Peugeot diesel it was low compression caused by the valve clearances being too tight. Readjusted them and it started far better.
But worn rings would also cause it.
So would a timing error on the injection, retarded injection can also cause white smoke. But I don't see how that could suddenly change.
 

·
Registered
Joined
·
22 Posts
Discussion Starter #5 (Edited)
Ive cleared the tank fuel and mixed diesel with some oil 5w30 around 200 ml and startup is better except white smoke after car has been sat for more than 3 hours.I tried to scan with pp2000 but weird ecu doesnt reply
It is siemens sid801 with hand primer

Sent from my SM-G928F using Tapatalk
 
1 - 5 of 5 Posts
Top