Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
186 Posts
Discussion Starter #1
Ok, new car (9yrs old) has had some stone chips touched up using one of those brushes that you use to get years ago, need to sort them properly, am i talking a bodyshop or a good detailer to flatten them so I can do a proper job??
 

·
Registered
Joined
·
120 Posts
If you dont have the confidence to try it yourself with a spray can and/or the colour is dfificult to match then go to a decent body-shop. If the spots are just raised blobs you can do what I do and use a very small detailing/polishing tool with a Dremel on slow speed to take the lump down then just use cutting polish. The brushes in those touch-ups are useless, may as well use a sweeping brush. I use the sharp point of a plastic toothpick/flosser. Main thing is not to expand on the area you are working on. If its a 3mm blob then use a steady hand and do just that and it should blend into the background.
 
1 - 2 of 2 Posts
Top