Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
A friend is replacing the clutch on my Peugeot Expert 2004.
I'm a bit in a hurry because we live pretty remote. But he has a difficulty getting out the right hand drive shaft. Is there any specific tool needed for that?
If so what is this tool called.
If not a special tool what tool is needed?
 

·
Registered
Joined
·
14,298 Posts
If you are talking about getting it out the carrier on rear mounting then you need to remove 2 11mm nuts and the threads they attach to then its just brute force to get it out.

The 11mm nuts dont need fully removed just enough to rotate the threaded locking pins but if unsure just remove completely.
 

·
Registered
Joined
·
1,097 Posts
Sometimes you have to help the shaft out with a hammer and drift. You'll need a drift thin enough to fit in the housing, and long enough to allow room to swing a hammer.

Roger.
 
1 - 3 of 3 Posts
Top