Peugeot Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter #1
hi folks ,i dont suppose anyone knows where i can get a brand new 2 port fuel housing for 2002 406 hdi 90 by any chance
 
G

·
Guest
Joined
·
0 Posts
Hi, I don't know about a new one ( other than Peugeot dealers ) but I am breaking a 406 with the Bosch filter housing you are after, if its any help?
 
G

·
Guest
Joined
·
0 Posts
Call it £15 including the postage.

The car is being stripped/scrapped so if you need anything else I can post it too, its a V reg 406 Hdi 110.
 
G

·
Guest
Joined
·
0 Posts
Okay, I had a quick peek at my donor car when I removed the intercooler, MAF, TPS, Camshaft sensor, Injectors etc ( only took an hour.... ) and the one I have available is indeed a 2 port one.

To avoid any mix up with me selling the wrong part - I have taken a picture of it.

Unlike the ones that are bolted on with 2 x 10mm bolts, this one seems to lift a bit and I can't see the bolts to unclip it...??

Just to confirm also, the donor car is a V reg...

The picture was taken in the dark..:nono:
 

Attachments

G

·
Guest
Joined
·
0 Posts
Oh, okay.

Thanks for clearing it up, as all my 406s to date have been 2002 or newer I have only seen the bolt on 3 port type, I just assumed this was a 2 port one.

Apologies for any mix up.
 
1 - 16 of 16 Posts
Top