Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1 (Edited)
My 207 SW's front left fog lamp was missing due to a front collision.
I've bought another, managed to get the bumper mount sorted so it would fit and then realised there was no power connector to be found anywhere near it.

There is a loom descending to the horn which has 2 bare wires sticking out of it (see pic: green and yellow) and am guessing that is what remains of the cable that ran to the fog lamp - anyone know if these are the correct wires for it?

Also need to know what connector to get for the lamp socket so I can make a new cable (See pic) - any ideas?

https://ibb.co/g0SzTy

https://ibb.co/bQzDoy



 

·
Registered
Joined
·
2,480 Posts
According to the SEDRE, the lamp is wired straight from the engine compartment fusebox (PSF1).

The connector to the lamp, 2V JN, is JauNe=yellow. Wire colours with Peugeot seem to be arbitrary and are not documented.
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter #3
OK, thanks. So a continuity test from that fuse to the wires sticking out of the loom should tell me which I need.

Any idea what the plug is called (the plug that is inserted into the fog lamp) so I can source it?
 

·
Moderator
Joined
·
6,599 Posts
The wires should also have numbers on them which should cross ref to the diagram above
 
1 - 7 of 7 Posts
Top