Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,423 Posts
Discussion Starter #1
my 307 had 283mm discs

ive been offered a whole set of hubs calipers etc but they come off a 136bhp 307.

on looking on servicebox the discs are 302mm.

is there a massive difference in the hubs or can they be fitted
 

·
Registered
Joined
·
3,423 Posts
Discussion Starter #7
i couldnt work out if the driveshaft splines are different. the front hub bearing definitely is

i checked on ebay again and there was someone locally breaking a 2.0 90bhp so i brought the hubs from that instead

only issue is the driveshafts are still attached :( might need to knock the cv joint off and reattach to mine
 
1 - 7 of 7 Posts
Top