Very easy, I have done on a 307 cc and sw. You will need the mirrors and the window motors. The switch panel looks different as to fold the mirrors back without locking the car, say when driving into a tight space, you need to pull the button back. But it is only the top part of the switch, the cover button, that is different, the panel itself has the fold back option.
You need the different window motors as the fold back mirror utilises these for switching and power. They have 3 connections rather than 2, and the mirrors have 2 connections rather than 1.
Fold back mirrors are fixed by bolts rather than screws on non fold back, so try to get these with the mirrors.
Facelift and non facelift are different and not interchangeable.
Have door trim panel clips spare, as a couple will break when removing.
Configure through PP.
Fitting is straightforward. Remove door panel and its just a matter of unscrewing old and fitting new.
You can do one at a time, waiting for the second to come along.
When I purchased my 508sw, I purchased a diagnostic interface as recommended on here, and installed the diagbox software (upto 7.83) and had no issues.
The other day, I went to check a friends motor, and now am getting a data error, and the software won't run or do anything. Keeps asking to...
Could someone please shed some light on this for me please. I have just successfully installed diagbox 7.02..and I have updates available, but dnt know if I need them yet. I now have to purchase the interface/scanner for it... My query is... Does it matter which one I buy.. Does it have to be a...
I had an automatic dimming rear view mirror on my 207 and it's one of the few things I miss on my 308.
Do you think it would be possible to retrofit an auto dimming unit in place of my standard one on my 308?