Peugeot Forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter #1
Hi I have a faulty com unit switch gear. test showed a faulty drivers airbag .
I really need to know is this a job I can do myself or have to use a garage .
my Peugeot dealer has went bankrupt .
I have managed to find a Delphi com that is correct for my car with all the functions from Bart Ebben Specialist Citroen Peugeot

Bartebben.com - Peugeot 307 combination switch second hand

thanks Ken
 

·
Registered
Joined
·
69 Posts
Discussion Starter #3
faulty comm

Cheers gibbo ive poped a message with photos of mine after reading the variants etc

thanks ken :thumb:
 

·
Registered
Joined
·
69 Posts
Discussion Starter #4
no luck yet

Hi gibbo no joy i would need to take the car in comm 2003 switch gear .still not found a correct match second hand one nothings ever been straigjt forward with my model . Bearing discs at the rear dearer than the front. 407 DUAL climate control module .no resister. Sent 2 units back on ebay because even
though they had all the right info got the wrong ones .twats.
Just buying a brand new one got the part number etc plus i'll get a small 10% dicount through my brother in law . Guy in holland is a bit hmmmmmm !!!!! cant answer all my questions
Plus he wants a bank transfer i said paypal but no .mastercard no . So bugger that
The joys of french electrics . Keeping the car anyway . Seems the only bargain i can get for this bugger is tyres from camskill .. Mot needs done for next friday so need to bite the bullet and get the original unit . Getting fitted by a peugeot mate lost his job in bathgate verve dealer went bankru. pt and never told
anyone ....dogey been in all the papers up here people psid cash deposits an ex soldier just left army and paid £11000 cash got bumped to .
Cheers ken
 

·
Registered
Joined
·
18 Posts
Hi

Hi if your anywhere near stoke on trent I have got one here I scrapped a 307 a while a go and kept the common bits
 

·
Registered
Joined
·
69 Posts
Discussion Starter #6 (Edited)
Delphi comm2003

Hi thanks but am away up north . west Lothian :thumb:
ive tried 3 second hand ones (£30 out of pocket returning them !!!!!!) and they were the wrong ones , Even after being told they are right ????? car goes in for MOT on Friday so my brother in law has ordered the correct one brand new discounted as he's a gaffer at a crash repair center , to be honest what I am getting a new one for what they are selling on ebay for £30 less second hand, which ive wasted on return bills.... plus getting my mate who used to work in Peugeot Bathgate(SHUT BANKRUPT GUY SHAFTED HIS STAFF AND CUSTOMERS ) to fit ,lives in my street .. Gave up on second hand ones , been a real pain in the arse Though :mad:

Thanks Ken
 

·
Registered
Joined
·
4,782 Posts
Hi thanks but am away up north . west Lothian :thumb:
ive tried 3 second hand ones (£30 out of pocket returning them !!!!!!) and they were the wrong ones , Even after being told they are right ????? car goes in for MOT on Friday so my brother in law has ordered the correct one brand new discounted as he's a gaffer at a crash repair center , to be honest what I am getting a new one for what they are selling on ebay for £30 less second hand, which ive wasted on return bills.... plus getting my mate who used to work in Peugeot Bathgate(SHUT BANKRUPT GUY SHAFTED HIS STAFF AND CUSTOMERS ) to fit ,lives in my street .. Gave up on second hand ones , been a real pain in the arse Though :mad:

Thanks Ken
its a comm 2003 not a comm 2000 they look the same and even say comm 2000 on them but if you look on the bar code sticker on the top it will say comm 2003 and a comm 2000 will not start a car with a comm 2000, i can fix a comm 2000 and even supply one but the problem is it would be untested as i have no means of testing it but i would still give a warranty with it and first class recorded post is only £4.10 small parcels
 

·
Registered
Joined
·
69 Posts
Discussion Starter #8
comm 2003

Thanks but i am going for the new one gets fitted mon-tues .
If bag ligjt satys on after fitting mate is getting the laptop to reset it again .hopfully car will be fit as a fiddle after that .
Cheers Ken
 

·
Registered
Joined
·
4,782 Posts
Thanks but i am going for the new one gets fitted mon-tues .
If bag ligjt satys on after fitting mate is getting the laptop to reset it again .hopfully car will be fit as a fiddle after that .
Cheers Ken
word of advise if the airbag light does not go out after a new unit is fitted that would mean it is either a faulty new unit, fitted incorrectly or a fault somewhere else on the car as the light would go out if the fault is fixed, there is not need to reset the codes to get the light out light on = fault light out = no fault simples, i have started selling a drivers airbag test kit have a look on ebay it comes with full intructions on how to use and also my phone number for tech support
 

·
Registered
Joined
·
69 Posts
Discussion Starter #10
word of advise if the airbag light does not go out after a new unit is fitted that would mean it is either a faulty new unit, fitted incorrectly or a fault somewhere else on the car as the light would go out if the fault is fixed, there is not need to reset the codes to get the light out light on = fault light out = no fault simples, i have started selling a drivers airbag test kit have a look on ebay it comes with full intructions on how to use and also my phone number for tech support
All sound I fitted it today light went out as did all lights on dash . all functions working perfect so MOT tomorrow :thumb:
cheers
 

·
Registered
Joined
·
69 Posts
Discussion Starter #12
com2003

Can anyone tell me if a comm2003 can be repaired ...faulty drivers air bag . Seems a waste i dont want to throw the old one away . I know the 2000 units can be repaired .
Just a thought . Might come in handy ??
Cheers :)
 

·
Registered
Joined
·
4,782 Posts
All sound I fitted it today light went out as did all lights on dash . all functions working perfect so MOT tomorrow :thumb:
cheers
great news, what you done with your old comms unit? I buy second hand units to fix and sell on with 6 month guarantee and a great customer service to get the correct unit posted first time, pm me if you would like me to buy your old unit
 

·
Registered
Joined
·
69 Posts
Discussion Starter #14
great news, what you done with your old comms unit? I buy second hand units to fix and sell on with 6 month guarantee and a great customer service to get the correct unit posted first time, pm me if you would like me to buy your old unit
PM sent

Cheers Ken
 
1 - 14 of 14 Posts
Top