[barbaren]

HI ...what faults do you have?..a description may help us

The fault is F000
Fault on BSM board- CAN not responding.
That is all it says.

 

[barbaren]

Not all readers work properly on Peugeots. Are you using a generic type or a dedicated one?

Diagbox

 

[barbaren]

HI and thanks for that...but what fault are you trying to fix ? what are the symptoms?

The windows have their own life[emoji23]
If I open driverside, rear left might open. Try closing again either nothing happens, or another window opens.
Then I would like all faults to be cleared.

 

[barbaren]

HI..307's are prone to the wiriing in the door shut causing issues...my own on had a couple of broken wires in the door shut causing a host of issues with windows.....check there carefully.. a the wire may even be broken within the cover of individual wires....

Would that throw a fault like that.
It is translated from Danish by me.
So it might be written a little different if I used an English version.
I will look check all wires this weekend.

 

[barbaren]

BSM is under bonnet fuse box, i have seen this code a few times sometimes they appear phantom and other times its been down to a BSI/ECU change and the setting not being changed to fully reflect the vehicle configuration

Dont know anything on the history of the car.
But have heard that the 307 apparently are known to burn the BSM board.
So I’ll try to get a salvage one and go from there.