Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi. Going to install a rd45 stereo in my expert tepee, suitably coded and a mic. lead supplied with it. Please can anyone tell me what route the cable should take if it were factory fitted and where the mic normally is fitted? Might it be there already?- if so, what am I looking for in terms of cabling at the head unit end? Thanks in advance for any replies.
 

·
Registered
Joined
·
14,956 Posts
Factory wiring if there is in the roof console where light etc are 2 wires in 1 like coaxial cable with a plug on it but the mic wiring wont go all the way to the plug for the radio as your van would have a nomad system fitted for handsfree if it had it so you need to find plugs behind glovebox and extend it to radio and fit it in the plug.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Thanks

Will have a look over this weekend; thanks- I'm guessing it may not have been run in as standard though? I know with some wiring looms they just run them in whether they are going to sue them or not- don't know if peugeot do this or did on the tepees?
 
1 - 3 of 3 Posts
Top