Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1 (Edited)
Recently i had my EGR replaced as it fell apart. Since having it back its not quite got the power it had. The turbo is working but i think i might have an air leak or blockage somewhere. I also took a gamble on a cheap OBD scanner and to my surprise it works.

Just £3.99 off ebay using it with torque lite for android.

2015 ELM327 V2.1 Mini OBD2 Bluetooth Car Scanner Android Torque Auto Scan Tool | eBay

Ive made a recording to see if anyone else thinks something is a miss or can anyone else make a recording to compare? Its an expert teepee 2L Hdi 2007. No error codes present.

https://youtu.be/_2aiWlT79_E
 

·
Registered
Joined
·
147 Posts
Don't know what proper boost should be on a 2.0hdi but I reckon it should be much higher than 0.1psi at 2000rpm. Only thing is that readings would maybe be much higher if the engine was under load rather than you just revving it in neutral.
 
1 - 5 of 5 Posts
Top