Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3,423 Posts
Discussion Starter #1
had this problem for ages but still cant sort it

for some reason when i had the cam belt done one of the engine mount bolts screwed up as i undid it. the trouble is it wont come out its just a little loose

ive tried everything wedging something under it and trying to unscrew but the thread must be dead

ive brought myself a dremel as space is really right but no luck

anyone else had anything like this. if it was accessible id angle grind it off. it seems to want to defeat me

im even tempting cutting the mount off to get to the bolt

i dont need it done but i cant undo the mount so if i need to do water pump etc
 

·
Registered
Joined
·
522 Posts
Not had this problem myself but I've found that a power file can get into places that angle grinders can't. I used my B&D power file to grind off the heads of the fuel pump mtg Brkt on my previous Freelander, probably smaller bolt heads but shouldn't take too long.
 
1 - 2 of 2 Posts
Top