Peugeot Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
any one add problems with eloys bag mine as got small hole around outlet washed off and tryed to seal with silicon have to get new one any idea of price:mad:
 

·
Registered
Joined
·
1,912 Posts
No but which car is it on, i'll get you the part number. Drill out the silicon and try araldite or epoxy putty to seal it. I have even trimmed off plastic from a damaged part and melted that into it with a soldering iron, worked fine.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #3
sorry it 2008 308 hdi 1.6 build code 11551 hole around 2mm long next to outlet bags half full thanks:thumb:
 

·
Registered
Joined
·
1,912 Posts
sorry mintor got lost with loads going on here. Had a look for your part but hdi 1.6 isnt sufficient as several choices of 1.6. Can you id the correct 1.6 as there are 8 types. Or pm me your vin which will give us the part.
 
D

·
Guest
Joined
·
0 Posts
He has an eolys rubbery type additive bag. There is no repairing that. New bag needed.
 

·
Registered
Joined
·
7 Posts
Hi ,sorryto intrude, but i have just boughta used 308 1.6 hdi 90bhp sport- 2009 model, and wondered if i have a DPF/FAP and if i do, where abouts is the ELoys bag??
Cheers,james.
 

·
Registered
Joined
·
107 Posts
Discussion Starter #11 (Edited)
Hi ,sorryto intrude, but i have just boughta used 308 1.6 hdi 90bhp sport- 2009 model, and wondered if i have a DPF/FAP and if i do, where abouts is the ELoys bag??
Cheers,james.
did not think there was one on a 90bhp. look just under car in front of passenger tyre it will be there under plastic cover. if you look in forum under engine it shows picture of filling addative tank :thumb:
 
1 - 11 of 11 Posts
Top