Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,493 Posts
Discussion Starter #1
is the egr valve on a 308 2008 same as a early 307 2004 model

should the filter in the oil feed pipe be left in or taken out

i see in my history my cars had new oil pump pipes but shows as under peugeot instruction in 2010. is that normal was there a recall at that time
 

·
Registered
Joined
·
15,377 Posts
come on you know the rules we need all the info what size is the engine in question !
 

·
Registered
Joined
·
15,377 Posts
It has an electronic EGR buried down back of engine above starter no vacuum to it.

Filter in turbo feed is fine to be left if serviced properly it gets clogged on badly serviced cars.
 

·
Registered
Joined
·
3,493 Posts
Discussion Starter #5
It has an electronic EGR buried down back of engine above starter no vacuum to it.

Filter in turbo feed is fine to be left if serviced properly it gets clogged on badly serviced cars.


Thanks all.

Does the gasket go between the egr valve and the blank or between the blank and the block

Can't upload a video on here but turbo looks ok spinning running


Sent from my iPhone using Tapatalk
 
1 - 5 of 5 Posts
Top