[freuter]

Hi,

I have a 508sw 2012
When I run the global test with Diagbox I get the message "Important, ECU present on the vehicle but configuration absent" on several control units, se the picture.

I also get this message on
Engine wiring housing, BSM_2010
Multifunction screen, EMF_C_UDS


Any suggestions on how to add/edit the configuration for these?

 

[noddy-hol]

Hi....just to ask.....what issues do you have with the vehicle?

 

[freuter]

Well, not much more that that the left wing mirror don't fold and the right wing mirror almost never folds out when I unlock the car. After some work with the buttons or if I give it a little push it unfolds and after that it works perfect until I lock the car and leave it for a while.
A little annoying

 

[alvaro.pc2011]

your car has the stop & start system but it is deactivated (DMTC) you can activate it by telecoding (ECU) and the other two can also be activated by telecoding in the BSI

 

[freuter]

Thank you. The start & stop system has been very unstable but after a changed the battery some weeks ago it has mostly worked as expected, but yes it is still not working every time I drive.
I am not familiar with telecoding, is it possible to do offline with diagbox?

 

[windy1603]

The drivers door module on a number of models needs to be present for the door mirrors to fold when locking or unlocking

Sent from my SM-T830 using Tapatalk

 

[alvaro.pc2011]

Yes you can do manual telecoding offline using diagbox

 

[alvaro.pc2011]

your car has the stop & start system but it is deactivated (DMTC) you can activate it by telecoding (ECU) and the other two can also be activated by telecoding in the BSI

Im going to correct myself because DMTC is part of the BSI not ECU