Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
I'm going to be swapping out the engine soon to a tu5jp4, with a be4 gearbox.

Is my best choice just to replace the struts, hub and driveshafts?
Since I'm fitting the engine to 1.4 originally.
Will it be OK just to use the 307 suspension, or will 207 1.6 parts share sizes?
Keep getting conflicting info on sizes.
 

·
Registered
Joined
·
15,377 Posts
You have a few issues to overcome here there are 2 strut sizes on 207 cars

307 parts wont fit

Gearcables will need messing about with

Immobiliser how are you planing on overcoming this ?
 

·
Registered
Joined
·
46 Posts
Discussion Starter #3
You have a few issues to overcome here there are 2 strut sizes on 207 cars

307 parts wont fit

Gearcables will need messing about with

Immobiliser how are you planing on overcoming this ?
That's the concern, unless I can swap inner joints on the driveshafts to fit into the gearbox, and just use the 1.6 207 suspension. It's just it being a be4 the splines being different has made it difficult to get right.

There's kits and bits I'll be getting hold of for the gearbox which should hopefully work out. Got ecu, bsi etc all ready to be plugged in. It's just a struggle on suspension.
 
1 - 3 of 3 Posts
Top