Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter #1
Hi there,

Relative newbie here....

Happy with my new 307 1.6hdi, just going through the little niggles....I can see that the door seal on the front driver side (the seal on the bottom of the car not the door itself) has come away from the car. The plastic fixings have sheared off, its just a case of removing them (or pushing them through) and fitting new ones....
Does anyone know the code for them or a link to them on ebay ?

Thanks in advance

Richard
 
G

·
Guest
Joined
·
0 Posts
Hi mate - if you can get to a Peugeot dealer they are about 9p each.

Just push the old ones through and clip the new ones in, although you may want to stick the seal in place as you go along the clips, so it doesn't happen again.:thumb:
 
G

·
Guest
Joined
·
0 Posts
The ones for my 406 were part number 6997 86

If you PM me your VIN number I can double check its the same clips for your car.

Kelv.
 
G

·
Guest
Joined
·
0 Posts
Service box is a bit slow tonight - I'll keep on trying though...:thumb:
 
G

·
Guest
Joined
·
0 Posts
Your part number is 6972 10 and they are different to the 406.

Service box shows you need 7 per side.

Kelv.
 
1 - 7 of 7 Posts
Top