Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5,904 Posts
Discussion Starter #1
Car is a 307 1.6 S HDI 90 BHP 2006 on 55 plate. The tyres on the car are 195/65/R15 H. With Bosch ABS8 ABS ECU.

Diagbox shows in the ABS ECU an option to set the tyre profile for the ABS. Going into this gives a choice of four different tyre sizes, two of these are 205/x/x while the other two are 195/65/R15 T & 195/65/R15 H.

Selecting either of the 195 sizes results in diagbox saying it is not a valid tyre size for the vehicle.. I've checked the label on the door pillar which confirms the tyres are correct. Is this just a bug in the Diagbox software or possibly that my ABS ECU doesn't support the tyre profile. The correct ECU was selected in Diagbox which then showed this option.

Not really an issue as everything seems to work fine, ABS works - it had plenty of use on the ice rink road sfter we had snow. Just curious as to why this happens.
 

·
Registered
Joined
·
5,904 Posts
Discussion Starter #3
In diagbox it says something like 'invalid option', can't remember exact wording. Will check next time it's connected.

Wasn't going to save any changes. Was just looking around to see what was available and what the various options were.
 
1 - 3 of 3 Posts
Top