Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello,

First of all, English is not my native language so I apologize if something is not understood.

I have a Peugeot 307 st. 2.0 HDI 136 from 2005.

The problem with the car now is that there is no real power when driving. The car can drive, but not with its normal power.

I have changed the 4 injectors. The old ones were Class 4, but the new ones are Class 5. I know that the injectors normally needs to be coded, but I have been told that the 2.0 HDI 136 can't be coded. Or does not need to - is this correct?

Other than that, it also says "Depollution system faulty" on the display and the engine lamp on the display is turned on.

Any idea about what the problem might be?

Thanks in advance.
 

·
Registered
Joined
·
14,864 Posts
Dont swap things before doing proper diagnosis by far the most common issues with this engine are vacuum related you need to ensure it has sufficient vacuum and all the solenoids work.

Injectors are NOT coded.
 
1 - 4 of 4 Posts
Top